Product Description
Product Description
Product Description
-F Series Parallel Shaft Helical gearbox
Product Features
1. Modular design, compact structure. Extra-slim parallel shaft helical gearmotors are the perfect solution when space is limited
2. F series parallel shaft helical gearmotors are typically used in conveyors and materials processing applications
3. Multi-stage (2 or 3 stages) gear units for low output speed
4. Hollow output shaft with keyed connection, shrink disk, splined hollow shaft, or torque arm
5. Can be combined with other types of gearboxes (Such as R Series, UDL Series)
6. Optional mounting options (foot-mounted, flange-mounted, shaft-mounted)
Product Parameters
Models | Output Shaft Dia. | Input Shaft Dia. | Power(kW) | Ratio | Max. Torque(Nm) | |
Solid Shaft | Hollow Shaft | |||||
F38 | 25mm | 30mm | 16mm | 0.18~3.0 | 3.81~128.51 | 200 |
F48 | 30mm | 35mm | 16mm | 0.18~3.0 | 5.06~189.39 | 400 |
F58 | 35mm | 40mm | 19mm | 0.18~5.5 | 5.18~199.70 | 600 |
F68 | 40mm | 40mm | 19mm | 0.18~5.5 | 4.21~228.99 | 820 |
F78 | 50mm | 50mm | 24mm | 0.37~11 | 4.30~281.71 | 1500 |
F88 | 60mm | 60mm | 28mm | 0.75~22 | 4.20~271.92 | 3000 |
F98 | 70mm | 70mm | 38mm | 1.1~30 | 4.68~276.64 | 4300 |
F108 | 90mm | 90mm | 42mm | 2.2~45 | 6.20~255.25 | 7840 |
F128 | 110mm | 100mm | 55mm | 7.5~90 | 4.63~172.33 | 12000 |
F158 | 120mm | 120mm | 70mm | 11~200 | 12.07~270.18 | 18000 |
Materials Data Sheet
Housing material |
Grey Cast iron |
Housing hardness |
HBS163~255 |
Gear material |
20CrMnTi alloy steel |
Surface hardness of gears |
HRC58°~62 ° |
Gear core hardness |
HRC33~48 |
Input / Output shaft material |
40Cr alloy steel |
Input / Output shaft hardness |
HRC32~36 |
Machining precision of gears |
accurate grinding, 6~5 Grade |
Lubricating oil |
GB L-CKC220-460, Shell Omala220-460 |
Heat treatment |
tempering, cementiting, quenching, normalizing, etc. |
Efficiency |
94%~96% (depends on the transmission stage) |
Noise (MAX) |
60~68dB |
Temp. rise (MAX) |
40°C |
Temp. rise (Oil)(MAX) |
50°C |
Vibration |
≤20µm |
Backlash |
≤20Arcmin |
Brand of bearings |
China top brand bearing, HRB/LYC/ZWZ/C&U. Or other brands requested, SKF, FAG, INA, NSK. |
Brand of oil seal |
NAK — ZheJiang or other brands requested |
Detailed Photos
Our process of production
Our product line
Company Profile
Company Profile
Bode was founded in 2007, which is located in HangZhou city, ZHangZhoug province. As 1 professional manufacturer and exporter, we have more than 17 years’ experience in R & D of worm reducer, gear reducer, gearbox , AC motor and relative spare parts. We have factory with advanced production and test equipment, the strong development of team and producing capacity offer our customers with high quality products. Our products widely served to various industries of Metallurgy, Chemicals, lifting, mining, Petroleum, textile, medicine, wooden etc. Main markets: China, Africa, Australia, Vietnam, Turkey, Japan, Korea, Philippines… Welcome to ask us any questions, good offer always for you for long term business.
FAQ
Q1: Are you trading company or manufacturer?
A: We are factory.
Q2: What kinds of gearbox can you produce for us?
A: Main products of our company: R, S, K, F series helical-tooth reducer, RV series worm gear reducer,H Series Parallel Shaft Helical Reduction Gear Box
Q3: Can you make as per custom drawing?
A: Yes, we offer customized service for customers.
Q4: Can we buy 1 pc of each item for quality testing?
A: Yes, we are glad to accept trial order for quality testing.
Q5: What information shall we give before placing a purchase order?
A: a) Type of the gearbox, ratio, input and output type, input flange, mounting position, and motor informationetc.
b) Housing color.
c) Purchase quantity.
d) Other special requirements.
Q6: How long is your delivery time?
A: Generally it is 5-10 days if the goods are in stock. or it is 15-20 days if the goods are not in stock.
Q7: What is your terms of payment ?
A: 30% Advance payment by T/T after signing the contract.70% before delivery
Dear customers, If you are interested in our product, welcome to contact with us.
Our team will do our best to meet your need 🙂
Application: | Machinery, Marine, Agricultural Machinery |
---|---|
Function: | Distribution Power, Change Drive Torque, Speed Changing, Speed Reduction |
Layout: | Coaxial |
Hardness: | Hardened Tooth Surface |
Installation: | Vertical Type |
Step: | Single-Step |
Samples: |
US$ 50/Piece
1 Piece(Min.Order) | |
---|
Customization: |
Available
| Customized Request |
---|
Types of Miter Gears
The different types of miter gears include Hypoid, Crown, and Spiral. To learn more, read on. In addition, you’ll learn about their differences and similarities. This article will provide an overview of the different types of miter gears. You can also choose the type that fits your needs by using the guide below. After you’ve read it, you’ll know how to use them in your project. You’ll also learn how to pair them up by hand, which is particularly useful if you’re working on a mechanical component.
Bevel gears
Bevel and miter gears are both used to connect two shafts that have different axes. In most cases, these gears are used at right angles. The pitch cone of a bevel gear has the same shape as that of a spur gear, except the tooth profile is slightly tapered and has variable depth. The pinions of a bevel gear are normally straight, but can be curved or skew-shaped. They can also have an offset crown wheel with straight teeth relative to the axis.
In addition to their industrial applications, miter gears are found in agriculture, bottling, printing, and various industrial sectors. They are used in coal mining, oil exploration, and chemical processes. They are an important part of conveyors, elevators, kilns, and more. In fact, miter gears are often used in machine tools, like forklifts and jigsaws.
When considering which gear is right for a certain application, you’ll need to think about the application and the design goals. For example, you’ll want to know the maximum load that the gear can carry. You can use computer simulation programs to determine the exact torque required for a specific application. Miter gears are bevel gears that are geared on a single axis, not two.
To calculate the torque required for a particular application, you’ll need to know the MA of each bevel gear. Fortunately, you can now do so with CZPT. With the help of this software, you can generate 3D models of spiral bevel gears. Once you’ve created your model, you can then machine it. This can make your job much easier! And it’s fun!
In terms of manufacturing, straight bevel gears are the easiest to produce. The earliest method for this type of gear is a planer with an indexing head. Since the development of CNC machining, however, more effective manufacturing methods have been developed. These include CZPT, Revacycle, and Coniflex systems. The CZPT uses the Revacycle system. You can also use a CNC mill to manufacture spiral bevel gears.
Hypoid bevel gears
When it comes to designing hypoid bevel gears for miter and other kinds of gears, there are several important parameters to consider. In order to produce high-quality gearings, the mounting distance between the gear teeth and the pinion must be within a predefined tolerance range. In other words, the mounting distance between the gear teeth and pinion must be 0.05 mm or less.
To make this possible, the hypoid bevel gearset mesh is designed to involve sliding action. The result is a quiet transmission. It also means that higher speeds are possible without increasing noise levels. In comparison, bevel gears tend to be noisy at high speeds. For these reasons, the hypoid gearset is the most efficient way to build miter gears. However, it’s important to keep in mind that hypoid gears are not for every application.
Hypoid bevel gears are analogous to spiral bevels, but they don’t have intersecting axes. Because of this, they can produce larger pinions with smooth engagement. Crown bevel gears, on the other hand, have a 90-degree pitch and parallel teeth. Their geometry and pitch is unique, and they have particular geometrical properties. There are different ways to express pitch. The diametral pitch is the number of teeth, while circumferential measurement is called the circumference.
The face-milling method is another technique used for the manufacture of hypoid and spiral bevel gears. Face-milling allows gears to be ground for high accuracy and surface finish. It also allows for the elimination of heat treatment and facilitates the creation of predesigned ease-off topographies. Face-milling increases mechanical resistance by as much as 20%. It also reduces noise levels.
The ANSI/AGMA/ISO standards for geometric dimensioning differ from the best practices for manufacturing hypoid and bevel gears. The violation of common datum surfaces leads to a number of geometrical dimensioning issues. Moreover, hypoid gears need to be designed to incorporate the base pitches of the mating pinion and the hypoid bevel gear. This is not possible without knowing the base pitch of the gear and the mating pinion.
Crown bevel gears
When choosing crown bevels for a miter gear, you will need to consider a number of factors. Specifically, you will need to know the ratio of the tooth load to the bevel gear pitch radius. This will help you choose a bevel gear that possesses the right amount of excitation and load capacity. Crown bevels are also known as helical gears, which are a combination of two bevel gear types.
These bevel gears differ from spiral bevels because the bevels are not intersected. This gives you the flexibility of using a larger pinion and smoother engagement. Crown bevel gears are also named for their different tooth portions: the toe, or the part of the gear closest to the bore, and the heel, or the outermost diameter. The tooth height is smaller at the toe than it is at the heel, but the height of the gear is the same at both places.
Crown bevel gears are cylindrical, with teeth that are angled at an angle. They have a 1:1 gear ratio and are used for miter gears and spur gears. Crown bevel gears have a tooth profile that is the same as spur gears but is slightly narrower at the tip, giving them superior quietness. Crown bevel gears for miter gears can be made with an offset pinion.
There are many other options available when choosing a Crown bevel gear for miter gears. The material used for the gears can vary from plastics to pre-hardened alloys. If you are concerned with the material’s strength, you can choose a pre-hardened alloy with a 32-35 Rc hardness. This alloy also has the advantage of being more durable than plastic. In addition to being stronger, crown bevel gears are also easier to lubricate.
Crown bevel gears for miter gears are similar to spiral bevels. However, they have a hyperbolic, not conical, pitch surface. The pinion is often offset above or below the center of the gear, which allows for a larger diameter. Crown bevel gears for miter gears are typically larger than hypoid gears. The hypoid gear is commonly used in automobile rear axles. They are useful when the angle of rotation is 90 degrees. And they can be used for 1:1 ratios.
Spiral miter gears
Spiral bevel gears are produced by machining the face surface of the teeth. The process follows the Hertz theory of elastic contact, where the dislocations are equivalent to small significant dimensions of the contact area and the relative radii of curvature. This method assumes that the surfaces are parallel and that the strains are small. Moreover, it can reduce noise. This makes spiral bevel gears an ideal choice for high-speed applications.
The precision machining of CZPT spiral miter gears reduces backlash. They feature adjustable locking nuts that can precisely adjust the spacing between the gear teeth. The result is reduced backlash and maximum drive life. In addition, these gears are flexible enough to accommodate design changes late in the production process, reducing risk for OEMs and increasing efficiency and productivity. The advantages of spiral miter gears are outlined below.
Spiral bevel gears also have many advantages. The most obvious of these advantages is that they have large-diameter shafts. The larger shaft size allows for a larger diameter gear, but this means a larger gear housing. In turn, this reduces ground clearance, interior space, and weight. It also makes the drive axle gear larger, which reduces ground clearance and interior space. Spiral bevel gears are more efficient than spiral bevel gears, but it may be harder to find the right size for your application.
Another benefit of spiral miter gears is their small size. For the same amount of power, a spiral miter gear is smaller than a straight cut miter gear. Moreover, spiral bevel gears are less likely to bend or pit. They also have higher precision properties. They are suitable for secondary operations. Spiral miter gears are more durable than straight cut ones and can operate at higher speeds.
A key feature of spiral miter gears is their ability to resist wear and tear. Because they are constantly being deformed, they tend to crack in a way that increases their wear and tear. The result is a harder gear with a more contoured grain flow. But it is possible to restore the quality of your gear through proper maintenance. If you have a machine, it would be in your best interest to replace worn parts if they aren’t functioning as they should.
editor by CX 2023-04-18
China Standard Steel Metal Reduction Starter Shaft Spline Pinion Custom Precision Machine Transmission Wheel Planetary Sun Drive Spiral Helical Gear near me supplier
Merchandise Description
Outstanding powder metallurgy elements metallic sintered components
We could supply numerous powder metallurgy areas which includes iron based and copper primarily based with top top quality and most affordable value, remember to only deliver the drawing or sample to us, we will in accordance to customer’s prerequisite to make it. if you are interested in our solution, you should do not hesitate to speak to us, we would like to supply the best high quality and greatest provider for you. thank you!
How do We Function with Our Clients
one. For a design and style professional or a massive business with your personal engineering group: we desire to obtain a entirely RFQ pack from you which includes drawing, 3D product, amount, photos
two. For a commence-up organization operator or environmentally friendly hand for engineering: just send an thought that you want to try out, you do not even need to know what casting is
3. Our sales will reply you inside 24 several hours to validate additional information and give the approximated quote time
four. Our engineering team will appraise your inquiry and give our offer inside of subsequent 1~3 doing work days.
5. We can prepare a specialized conversation conference with you and our engineers collectively whenever if necessary.
Location of origin: | Jangsu,China |
Sort: | Powder metallurgy sintering |
Spare elements sort: | Powder metallurgy elements |
Equipment Take a look at report: | Offered |
Substance: | Iron,stainless,metal,copper |
Important selling details: | High quality assurance |
Mould kind: | Tungsten steel |
Material normal: | MPIF 35,DIN 3571,JIS Z 2550 |
Application: | Modest house appliances,Lockset,Electric powered instrument, auto, |
Manufacturer Name: | OEM Provider |
Plating: | Custom-made |
Right after-product sales Provider: | Online assistance |
Processing: | Powder Metallurgr,CNC Machining |
Powder Metallurgr: | Higher frequency quenching, oil immersion |
Top quality Manage: | a hundred% inspection |
The Edge of Powder Metallurgy Process
1. Expense powerful
The final merchandise can be compacted with powder metallurgy technique ,and no want or can shorten the processing of device .It can save content tremendously and lessen the generation value .
two. Intricate designs
Powder metallurgy makes it possible for to get sophisticated shapes right from the compacting tooling ,with out any machining procedure ,like teeth ,splines ,profiles ,frontal geometries and many others.
three. Substantial precision
Achievable tolerances in the perpendicular course of compacting are usually IT 8-9 as sintered,improvable up to IT 5-7 after sizing .Further machining operations can increase the precision .
four. Self-lubrication
The interconnected porosity of the substance can be filled with oils ,obtaining then a self-lubricating bearing :the oil supplies constant lubrication between bearing and shaft ,and the program does not need any added exterior CZPT .
five. Inexperienced technologies
The producing method of sintered components is licensed as ecological ,because the substance waste is very lower ,the product is recyclable ,and the energy performance is great since the content is not molten.
FAQ
Q1: What is the kind of payment?
A: Generally you should prepay 50% of the overall sum. The stability must be spend off prior to shipment.
Q2: How to guarantee the high top quality?
A: one hundred% inspection. We have Carl Zeiss high-precision tests gear and testing section to make certain every single solution of size,visual appeal and stress check are excellent.
Q3: How long will you give me the reply?
A: we will make contact with you in 12 hrs as soon as we can.
Q4. How about your delivery time?
A: Normally, it will just take twenty five to 35 times soon after getting your CZPT payment. The specific delivery time relies upon on the products and the amount of your purchase. and if the product was non common, we have to contemplate extra ten-15days for tooling/mould produced.
Q5. Can you make in accordance to the samples or drawings?
A: Of course, we can create by your samples or complex drawings. We can construct the molds and fixtures.
Q6: How about tooling Demand?
A: Tooling demand only cost as soon as when very first purchase, all potential orders would not demand again even tooling fix or underneath maintance.
Q7: What is your sample plan?
A: We can source the sample if we have all set components in stock, but the clients have to pay out the sample price and the courier cost.
Q8: How do you make our company long-expression and great partnership?
A: 1. We hold excellent top quality and aggressive value to make certain our clients gain
2. We respect every consumer as our pal and we sincerely do business and make friends with them, no subject in which they arrive from.
Below are some rewards of chain drives over belt and equipment drives: They can be utilized for lengthy and limited distances. Many axles, are driven by chains. They are compact and have a modest overall dimension, so even in the celebration of a hearth, you will not experience any bad issues. Temperature and ambient circumstances do not influence its procedure. Chain drives do not require first rigidity. They are extremely successful (up to ninety six%) and have no slip and creep throughout transmission, making sure a excellent equipment ratio. Chain drive, simple to install. Chain drives are lower maintenance, withstand abrasive conditions and work in wet circumstances
This kind of chain is utilised in the original levels of electricity transmission advancement. When the sprocket moves nearer to or absent from the tooth, sounds is produced as the tooth rub towards the connecting rod. These types of chains are used to some extent for reduced-velocity conveyor chains.